HomeФильмы и анимацияRelated VideosMore From: DVE Store

Ursa Mini 4.6K Camera Software 4.0: In Depth

181 ratings | 24106 views
Jason dives into the new Blackmagic Design Camera Software on the Ursa Mini 4.6K! The Ursa Mini 4.6K is available here in our online store: http://www.dvestore.com/searchresults.html?search_query=ursa+mini What's new in Blackmagic Camera Setup 4.0 Beta Blackmagic URSA Mini 4.6K and 4K New URSA Mini OS. New heads up display. New menu system to allow faster operation. New monitoring options separately configurable for different SDI outputs. Added ability to load 3D LUTs (Look Up Table) for monitoring. Added ability to save and load camera settings presets. New Heads Up Display Features Swipe up or down to show and hide the heads up display. Added pan-able focus zoom. Added ability to change frame rate directly from heads up display. Added ability to change iris from heads up display on electronic lenses. Added ability to toggle timecode or duration from heads up display. Added ability to toggle favorite off-speed frame rate quickly. Added ability to change shutter angle from heads up display. Added flicker free shutter angle suggestions. Added manual shutter angle option for up to 2 decimal places. Added indicators for genlock, timecode status, and sensor window in heads up display. Added ability to change ISO from heads up display. Added ability to change white balance from heads up display. Added white balance presets including daylight, tungsten, fluorescent, mixed lighting, and overcast. Added tint control. Added auto white balance feature. Added audio input and headphone level control from the heads up display. Added media status page for formatting cards and media information. Added ability to toggle battery indicator from heads up display. Added monitoring option controls from heads up display including zebra, focus assist, frame guide and grids. New Metadata Features Improved slate and metadata functionality. Added lens data information to slate metadata. Added auto-fill lens metadata from electronically controllable lenses. Changed slate shortcut from a single tap to a sideways swipe on the LCD. New Record Features Added additional ProRes resolutions for URSA Mini 4.6K including 4.6K 16x9, 4.6K 2.4:1, 4K DCI, 3K Anamorphic, 2K 16x9 and 2K DCI. Added additional RAW resolutions for URSA Mini 4.6K including 4.6K 2.4:1, 4K 16x9, 3K Anamorphic, 2K 16x9 and HD. Added option to select the preferred card for recording. New Monitor Features Improved screen colorimetry for the built in LCD. Added ability to switch 3D LUT on and off for each output individually. Added ability to switch false color, zebras, focus assist, frame guides, grids and safe area guide on or off for each output individually. Added clean feed toggle for each output. Added program tally indicator for the built in LCD and Front SDI when using ATEM. Added monitoring option for tally, crosshairs and centre dot as part of grids. Added 14:9 frame guides. Added configurable safe area guides. Expanded options for focus assist to include red, green, blue, black and white as well as peaking. Added option for viewing codec and resolution setting instead of meters on the built in LCD. New Settings Features Added ability to program function buttons as a preset for frame rate, iris, white balance, ISO or shutter angle. Added ability to program function buttons for Up or Down frame rate, iris, white balance, ISO or shutter angle. Added ability to program function buttons as a toggle for clean feed, display LUT, frame guides, focus assist, false color, zebra, grids, safe area guides, off-speed and color bars. Added flicker free shutter frequency selection for 50Hz or 60Hz. Added support for drop frame timecode. Added ability to trigger color bars from camera. Added factory reset function. Added hardware ID display. Added software version display. New Presets Features Added ability to create up to 12 global camera settings presets. Added ability import and export camera presets to CFast media. New 3D LUT Features Added ability to monitor with 3D LUTs. Added ability to import 3D LUT from CFast media. Added ability to store up to 6 custom 17 point or 33 point LUTs into the camera's internal flash memory. Added the ability to export one of the camera's 3D LUTs to CFast media so you can pass the 3D LUT to a colorist or editor. Added ability to delete 3D LUT from camera's internal memory. New General Features Improved timecode functionality for external timecode and jam timecode. Improved white balance performance. Added option for single clip or all clip playback. Added loop playback feature. Download the Blackmagic Camera 4.0 Update Public Beta firmware / software https://www.blackmagicdesign.com/support/family/professional-cameras
Html code for embedding videos on your blog
Text Comments (56)
Bec Andrews (1 year ago)
Great video, funny too. Thanks!
Eladio Pérez (19 days ago)
Well done bro
Eladio Pérez (19 days ago)
Well done bro
OldSchoolFilm1930 (5 months ago)
"You can type in director, so you can feel like a big shot." - :D I do that though I probable be more of a big toot rather then shot.
David L. Walker (8 months ago)
Thank you for doing this video
DVE Store (8 months ago)
Thanks for watching, David!
MST.0356.2016 (8 months ago)
The Yuri (9 months ago)
When in 3K anamorphic mode? can you actually desqueeze the image? to see it properly I mean? If so can I desqueeze it and view properly on the monitors feeding from both SDI outs? thanks.
DVE Store (9 months ago)
I apologize; I don't have any anamorphic experience!
Carlos Faria (1 year ago)
Nice video! I'm having a hard time trying figure out how to delete and skip recorded clips on my Ursa Mini 4.6K. I'm using the SSD Recorder. Can you help? Thanks
McDudes (1 year ago)
No waveforms or histogram?
David Larney (1 year ago)
Thank you, very helpful.
DVE Store (1 year ago)
Thanks for watching!
redz bonaparty (1 year ago)
Hey?How do i show the Histagram on the monitor.
Jesse Simon (2 years ago)
I don't suppose there is any way to have focus assist on, but have playback not have peaking lines on during playback, is there? Do you know? The last software allowed for this. One option for this version is to use the Clean Feed, but then you miss out on having the touchscreen playback buttons. So, just wanted to know if you knew a way to do this.
Chorus films Rajan Rai (2 years ago)
hello sir how to set high speed upto 120 fps ?
Jesse Simon (2 years ago)
You have to change to window sensor. Will not record 120fps on full sensor mode. Only up to 60fps. So window the sensor and THEN play with the fps and off speed recording, if you want playback in slow motion.
Sean Sweetman (2 years ago)
I would also like this answer to this
Chorus films Rajan Rai (2 years ago)
hello sir , I could not set the 60 fps for high speed on this . Can u help me please ?
Pablo Costamagna (2 years ago)
Can you record RAW 1920x1080 or just 4.6k? Thanks!
Does the URSA support autofocus with EF lens?
bashar awad (2 years ago)
Thank you for yhis review Please do you know how to change the shutter measurements from angle to speed ??????I neeeed it
@bashar awad I think the option is not currently available. Maybe in future firmware updates.
bashar awad (2 years ago)
At min 10:47 you will see what I mean
bashar awad (2 years ago)
Menu - setup - in the first page there is something Shutter measurement Its by default shutter angle And there is inactive shutter speed My question is how to active the shutter speed option
DVE Store (2 years ago)
I believe shutter angle is the only option.
Alberto Santos (2 years ago)
Will be using this camera next week. Thank you for the great walk-through!
Tim Kyle (2 years ago)
I tried importing a 3d lut that I made with lut buddy on premiere... It shows up when I go to import but doesn't work. Anyone having any luck?
Presque vu (2 years ago)
Thanks for the walk-through. Is there a way to set the Monitor (LCD) Dynamic Range to "Video" mode while keeping Dynamic Range for Record to "Film"? You could do this with the older software, but I can't find this option now. It allowed you to see a less flat image for easier viewing while recording in Film mode.
Five River Films (2 years ago)
You go the LUT tab
Sergio Monserrate (2 years ago)
how do you plackback slow motion on the camera's LCD screen? It doesn't playback in slow motion for me. also what does offspeed frame rate mean?
DVE Store (2 years ago)
The Offspeed Frame Rate setting is how you shoot in slow or fast motion. For instance, if you are shooting in 23.98 and you set the offspeed frame rate to 18. Your footage will still play back at 23.98, but the action will happen 25% faster.
Presque vu (2 years ago)
Is the Auto White Balance feature new with this update? I didn't see it in v3.4.
DVE Store (2 years ago)
I believe it is new.
Loyco (2 years ago)
Thank you! We will update the software tomorrow! I like the Iris function too!
Jack Lucas Laugeni (2 years ago)
can you make 2k DCI RAW not windowned ??
DVE Store (2 years ago)
In 2K DCI RAW, you can set the Project Frame Rate up to 60 fps and the Offspeed Frame Rate up to 120 fps.
Jack Lucas Laugeni (2 years ago)
how many fps you can do in 2K DCI RAW ?
DVE Store (2 years ago)
Hi, Jack. The answer is "no". You can shoot up to ProRes XQ in 2K DCI, un-windowed. But as soon as you switch to RAW, it automatically goes into window mode.
ESSECIFILMPRO (2 years ago)
shared https://www.facebook.com/uhdworld.essecifilmpro/
rockstarforever (2 years ago)
This is great. Thanks. Do you know if the Anamorphic 3K option is 4:3 so we can use a 2x anamorphic lens?
Anand Vyas (2 years ago)
It is 4:3
rockstarforever (2 years ago)
+DVeStore, Inc. Thanks! That looks 4:3 to me
DVE Store (2 years ago)
Thanks! Here's the interface in 3K Anamorphic mode with a standard 50mm lens. https://goo.gl/photos/o5PnUEmTEvuL15ws9
Narek Avetisyan (2 years ago)
One question. When shooting at lower resolutions than 4.6K does the camera crop the image, line skip or does it oversample?
Anand Vyas (2 years ago)
It debayers the whole sensor
James Jackson Films (2 years ago)
you can go down to 1080 and not crop. you only crop in of your in window mode and want to access up to 120 fps outside of windowed mode you cap at 60
Narek Avetisyan (2 years ago)
ok thx :)
DVE Store (2 years ago)
You can go into crop mode if you like, and it gives the effect of a longer lens; or you can use the whole sensor. I'm not sure what kind of interpolation it uses though.
Narek Avetisyan (2 years ago)
Great walkthrough!
DVE Store (2 years ago)
Thanks, Narek!
FindLiberty (2 years ago)
Very nice review, wish I could afford one; great features!
DVE Store (2 years ago)
RepaireroftheBreach (2 years ago)
Great video thanks! Would love to see what the firmware looks like in playback. If it shows recorded clips as a list? Thumbnails? If I can playback any clip Ive recorded or just the ones that match my record mode etc? If in camera mode, is there a quick way to review the last clip?
DVE Store (2 years ago)
I've been testing out the playback. Unfortunately, none of the functions on your list are there. Once switched into playback mode, the latest clip recorded in your current record mode will show up, full screen. You won't see any clips recorded in a different record mode. You can arrow-button between clips, but there is no list mode or thumbnail mode. And I don't see any way to quickly review the last clip. It seems to take 3-5 seconds to switch back and forth between play and record modes.
DVE Store (2 years ago)
Good questions! I'll look into those today.

Would you like to comment?

Join YouTube for a free account, or sign in if you are already a member.