Home
Videos uploaded by user “userwl2850”
TURNING AND BORING TITANIUM . with core return.
 
03:07
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Views: 20067 userwl2850
1000mm long INCONEL 718 bar 200mm hole bored thru.  156mm core recovered
 
07:14
When 2 inch (50mm) is too big. 1000mm long INCONEL 718 bar with 200mm hole bored thru. 156mm core recovered by method of trepanning. Problem solving when bed length is not long enough.
Views: 14745 userwl2850
HOW TO MAKE A TREPANNING TOOL.
 
03:55
this tool will cut a 10 inch hole in metal.
Views: 37411 userwl2850
9" hole bored thru 15" long inconel 718
 
01:48
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Views: 5619 userwl2850
Easiest way to drill holes in hard metals. Trepanning.
 
02:24
INCONEL 718 double age hardened. 92mm hole drilled through 26" long .
Views: 2070 userwl2850
Aircraft landing legs. The first stage machining
 
04:25
I have 48 of these to do over 6 weeks. They are made of grade 5 Titanium and the hole bored through is 7.5" they must be trepanned to produce a core that can be tested to destruction.
Views: 3077 userwl2850
step by step guide to make a trepanning tool.
 
09:42
visit www.tooltekprecision.co.uk
Views: 19790 userwl2850
How many carbide inserts do I use 🤔 inconel 718
 
03:50
Start size = 245mm X 687mm long. Bore at 115mm +0 -1 I rough trepanned bore at 112mm tool and counter bore to 114mm using the same tool with adjusted outer cartridge. 15 carbide inserts used on total length of 2750mm long. Inserts are SANDVIK WCMX 1020 grade.
Views: 1786 userwl2850
Machining against time. Can I do it. INCO 625
 
07:04
18.5" long INCONEL 625. Bored at 90mm. Arrived Tuesday x7 pcs at 2.30pm finished Friday before 2pm.
Views: 3115 userwl2850
Double tool turning. Inconel 718 forged bar.
 
10:16
large size turned to 180mm from 205mm. 17 rpm 8 thousands feed. small size turned to 100mm from 125mm 36 rpm 10 thousands feed. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 98589 userwl2850
Turning a bent forging into round bar. G5 Titanium
 
03:16
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 8541 userwl2850
HIGGS BOSON AKA THE GOD PARTICLE FOUND. BBC  NEWS. 4th JULY 2012.
 
03:05
science for the win. a new 4th july celebration. steven hawking and brian cox.
Views: 2377 userwl2850
for SUNPPAA why turning away from the chuck is better.
 
01:20
304 stainless steel. my favourite machine channel asked why i always turn away from the chuck. this forging is 2000mm long and turning towards the chuck would not be possible without using a steady rest which would easy add 2 hours extra time to turn. 7mm cut to remove the scale both ways.
Views: 11822 userwl2850
BORE TURN AND COUNTERBORE F55 SUPER DUPLEX
 
13:03
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 16118 userwl2850
Extreme feed rate of .040"  1mm per revolution.  Getting under the crust.
 
01:38
GRADE 5 TITANIUM. Removing the outer surface.
Views: 8705 userwl2850
Making thin wall tube from solid bar 316 stainless
 
05:20
Bar is 240mm diameter and bored at 210mm x 915mm long returning a 170mm solid core to be reused. 38rpm with .010" or .25mm feed rate. X 16 pcs
Views: 1917 userwl2850
Making a 13.25" 336mm TREPANNING TOOL to cut through 20" long steel bar.
 
13:08
this tool is to hold in a lathe tool post. All parts were made on manual Bridgeport miller, Dean Smith and Grace lathe and a Denham turret lathe by myself. it will cut a 13.25" hole through 20" long steel bar in one pass or 40" long half and half. the core will be 11.5" which can be used to make other things. If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 63168 userwl2850
HOW TO BORE  ALLOY 718 STEEL FORGINGS.
 
04:05
I FIRST MAKE A SLEEVE (SPIDER) TO FIT THE FORGING INSIDE. BORE HALF WAY TURN AROUND TO FINISH. NO TURNING NEEDED.
Views: 46382 userwl2850
Manual milling on a Bridgeport.  Easy tool copy.
 
13:56
Watch me copy a cutting tool. Made from O1 tool steel.
Views: 4820 userwl2850
Inconel 625 alloy. 110mm hole drilled through 330mm thick bar.
 
03:06
Start size 242mm diameter X 687mm long. Inconel 718 double aged hardened. I bore it first by trepanning a rough hole at 112mm and using the same tool counter bore to 115mm +0 -1mm so finish size is 114mm. Cores returned to the customer are 73mm diameter. CARBIDE inserts are SANDVIK 1020 grade WCMX.
Views: 2083 userwl2850
SHEFFIELD WEDNESDAY BAND. OWLS VS BIRMINGHAM. OWLS WIN.
 
01:42
THE SLEEPING GIANTS ARE AWAKE. ,,,,,,, WIDE AWAKE. THE BAND PLAYS ON. swfc and england band.
Views: 7445 userwl2850
Titanium grade 5. Turn to 77mm from 90mm bar x 3.5mtr long.
 
08:00
Dean Smith and Grace type 21 lathe with 94mm through spindle. 110 rpm with .015" or .037mm feed rate.
Views: 1654 userwl2850
making a pull bore tool to cut a 360mm hole.
 
14:06
watch me make a tool to finish cut 13" hole through steel bar.
Views: 29210 userwl2850
TREPANNING STAINLESS STEEL. 17/4 ph.
 
01:39
boring a 230mm hole through 600mm long bright bar.
Views: 5472 userwl2850
Alloy A286 8"diameter 20"long. Bored at 5" by trepanning.
 
03:01
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 2467 userwl2850
TURNING 4140 STEEL. 11.5" TO 10" X 125" LONG.
 
04:03
1.5" OR 38MM turning 4140 steel bar.
Views: 6662 userwl2850
Machining Alloy 718 solution annealed.  290mm-262mm.
 
03:26
If you enjoy my engineering videos please subscribe to my engineering channel so get the most up to date content: https://www.youtube.com/user/Tooltekprecision
Views: 1751 userwl2850

Mukombero viagra generic
Ca mg zn d3 effervescent aspirin
Lipitor dosage increased from 20 mg to 40
Fortamet vs metformin xr 500mg
Cytotec 200 mg misoprostol tablets